Hardwood Flooring in Oklahoma City: The Complete Guide

Every other floor on the market is trying to look like this one. Real hardwood is the floor the copies imitate — and it is still the one that gets refinished instead of replaced, decades in. This guide covers the hardwood we actually sell and install in Oklahoma City: what it is made of, which species and finishes hold up to real life, how it goes in, and where it belongs. No catalog-speak — this is the same walk-through our team gives in the showroom.

What we stock: engineered hardwood, 58 colors deep

Our hardwood wall is the Jackson Hardwood line — 58 colors across ten collections, from the wide-plank European oak looks in Scenic and Tempest Plank to the hickory workhorses in Kingston and Hillstone. Every color in the line is engineered hardwood: a genuine hardwood wear layer — the part you see, walk on, and can point to and say “that is real oak” — bonded over a layered core.

The species on the wall are hickory, European oak, white oak, and oak. Planks run from 5 inches up to 10 inches wide, in random lengths up to about 86 inches — wide and long, so a room reads like a wood floor, not a grid of little boards. Thicknesses run from 3/8″ to 5/8″ depending on the collection, and coordinating trims are available for most colors, so transitions and stair noses match instead of almost matching.

Engineered vs. solid: the short version

Solid hardwood is one solid piece of wood from top to bottom. It is a fine floor with two hard limits: it can only be nailed down (never glued or floated), and it expands and contracts with Oklahoma’s humidity swings more than most homeowners expect. Engineered hardwood keeps the real wood surface and fixes both problems — the layered core holds the plank stable, and it can be floated, glued, or nailed depending on the product and your subfloor.

That second point decides a lot of Oklahoma City projects. Most homes here sit on a concrete slab, and you cannot nail a floor to concrete. Engineered hardwood glued or floated over a slab gives you real wood in homes where solid was never an option. Our crews check subfloor moisture before every install — wood over a damp slab is a problem we catch on day one, not month six.

Species: hickory does the heavy lifting

All four species in the line are oaks and hickory, and the practical difference is hardness and grain. Hickory is the hardest of the group and the one we point dog owners and busy households toward — its color variation and strong grain hide the small stuff daily life leaves behind. White oak is the classic: even grain, takes stain evenly, the look most people picture. European oak is the wide-plank specialist — longer, cleaner boards with a calmer grain, the modern look. Standard oak colors round out the traditional end of the wall.

Finishes and textures that hide real life

Most of the line wears a factory-cured aluminum oxide finish — the hardest clear coat used on residential hardwood, applied under factory conditions no site-applied finish can match. Some collections use a nano finish technology or an antimicrobial urethane instead. What matters at your kitchen table: these are finishes built to be lived on, not tiptoed around.

Texture matters as much as the finish. Most colors in the line are wire-brushed — the soft grain is brushed out, leaving a matte, textured surface that shrugs off the sight of scratches and dust. Hand-scraped colors are on the wall too, for a more rustic read. A smooth, glossy floor shows everything; a wire-brushed matte floor is the one that still looks good in year five with two dogs in the house.

How it goes in: float, glue, nail, or staple

Installation method follows the product and the subfloor, and the line gives us every option: most colors can be floated or glued, many can be nailed, and a few are staple-down products. Before any of that, the wood acclimates in your home and we moisture-test the subfloor. Then our own crews install it — no day-labor roulette — and every installation is backed by Floor Pro’s Lifetime Labor Warranty. The manufacturer covers the floor; we cover the workmanship, for as long as you own the floor.

Where hardwood belongs — and where it doesn’t

Living rooms, bedrooms, hallways, dining rooms, home offices: this is hardwood’s home turf, and engineered construction handles Oklahoma humidity swings in all of them. Kitchens are a judgment call — engineered handles a normal kitchen fine, but a household that mops heavy and spills daily should hear the case for our waterproof lines too. Full bathrooms and genuinely wet rooms are where we steer you elsewhere: standing water is the one thing real wood never signed up for. Below-grade rooms and any slab with a moisture history get a moisture test and a straight answer about what we find.

Keeping it looking like that

Hardwood care is simple and specific: sweep the grit, damp-mop with the right cleaner, keep steam and vinegar away from it. We wrote the whole routine up separately — read how to clean hardwood floors safely before your first mop, because two of the most common cleaning habits quietly damage factory finishes.

Come walk the wall

Hardwood is a see-it-in-person purchase. At our Oklahoma City showroom you can walk the full Jackson Hardwood wall, line the hickories up against the European oaks, and take samples home to live with for a few days. When you are ready, the free estimate measures your rooms and gives you one detailed, all-in quote for the floor you picked — product, install, trims, the works.

Call Floor Pro at (405) 977-4058 — or start with our hardwood flooring page to browse the collections online first.

Frequently Asked Questions

What is the difference between solid hardwood and engineered hardwood?

Solid hardwood is milled from a single piece of wood. Engineered hardwood is a real hardwood wear layer bonded over a layered core, which makes it more stable through humidity and temperature swings. Both are real wood on the surface — the difference is what is underneath, and where each one can be installed.

Which hardwood species holds up best with dogs?

Hickory. It is the hardest species in the Jackson Hardwood line we carry, and its busy grain hides the small marks busy households leave behind. A wire-brushed finish hides even more. No wood is claw-proof, but hickory is as close as the lineup gets.

Can engineered hardwood be refinished?

Some of it can. Colors in the line with a sawn wear layer — 3 mm and 4 mm sawn faces — can usually be sanded and refinished at least once. Thinner wear layers are built to be lived on as they are. Ask us about the specific color you are considering and we will tell you straight which side of that line it falls on.

How long does hardwood flooring last?

With proper care and a professional install, 30 to 100 years. The finish will need attention long before the wood does — that is maintenance, not replacement. It is the one floor that can outlast the mortgage.

What warranty covers a hardwood floor from Floor Pro?

The Jackson Hardwood lines carry manufacturer finish warranties of 20 years and longer — many run 25 years to lifetime. And every installation we do is backed by Floor Pro’s Lifetime Labor Warranty: if our workmanship ever fails, we fix it.